Where AI meets Food Waste Prevention
The most seamless setup for anyone
Below, you can read about the simple setup installations required to start using AI in reducing food waste on your campus.Â
Scroll Down
Just a couple steps away...
1. Obtain the required hardware components
In order to have a successful project, you need the following components:
- Raspberry Pi 4/5
- Raspberry Pi Camera Module 2
- Raspberry Pi 27W USB-C Power Supply
- USB Wired Mouse
- USB Wired Keyboard
- Monitor (or any display) & Power
- Micro-HDMI to HDMI Cable
- High Performance MicroSD Card
- Access to a 3D Printer
2. 3D Print the Casing & Assembly
Please click the below button to be directed to the GitHub page containing all the .gx files ready for 3D print.
Please note, that there will be 2 separate components 3D printed, the lid containing the camera holder and the base. You are required to glue both modules together as illustrated in the image.
3. Software Setup
After obtaining the hardware and completing the assembly stage, you need to flash the MicroSD card with the required operating system.
To do this, you need to navigate to the XYZ folder in the main GitHub directory. Copy all the files in the directory and paste them into the MicroSD card. This process may take a few minutes.
After completion, insert the MicroSD card into the Raspberry Pi and reinstall the device into the casing.